|
 |
VIPServerTM
/Video
IP Server
VIP101H.264 - 100BaseT/Poe
High quality H.264 Algorithm
Encoder/Decoder/Duplex selectable
Full-Duplex Audio/Video Transmission
30fps/25fps @ Full D1 Resolution
De-Interlaced Video at 30fps
Dynamic IP Support with Dynamic DNS
Power over Ethernet (PoE) Support
Data Storage against Network Failure or Event (USB2.0)
Watchdog for System Recovery
Support for PTZ and Controller
1:N Multicasting and Relayed Data Transmission
GUI Images
Specifications
Software
|
Features |
Specifications |
|
System |
System Mode |
Encoder, Decoder, Duplex |
|
Network |
Network Interface |
Ethernet 10/100Base-T (RJ-45) |
|
Network Protocol |
TCP/IP, UDP, Multicast, DHCP, SMTP, HTTP, SNMP, RTP, RTSP |
|
Video |
Standards |
H.264 compression algorithm |
|
Data Rate |
32Kbps ~ 4Mbps |
|
Resolution |
NTSC : 720x480, 720x240, 352x480, 352x240 |
|
Max Frame Rate |
NTSC : Max 30fps |
|
Frame Rate Range |
NTSC : 0.2 ~ 30fps |
|
Input |
1 x Composite (1 Vpp 75 Ohm, BNC) |
|
Output |
1 x Composite (1 Vpp 75 Ohm, BNC) |
|
Motion Detection |
Sensitivity Adjustment |
|
Audio |
Standards |
G.711 |
|
Sample Rate |
8KHz |
|
Data Rate |
64Kbps |
|
Input |
1 x Line-In (Mini-stereo, Single Mono) |
|
Output |
1 x Line-Out (Mini-stereo, Single Mono) |
|
Serial |
Port1 |
1 x RS-232 (D-Sub 9Pin) |
|
Port2 |
1 x RS-422/485 (Treminal Block) |
|
Data Rate |
2,400bps ~ 115,200bps |
|
Sensor/Alarm/etc |
Sensor Input |
2 x NO Contact (Terminal Block) |
|
Alarm Output |
2 x NO Contact (Terminal Block) |
|
Beep |
1 x Buzzer 88dB Min |
|
Reset Button |
1 x Factory Reset Button |
|
User Interface |
System Status |
4 x LED |
|
Storage |
Recording/Backup |
1 x USB 2.0 Port |
|
Software |
True CMS/Web Viewer |
Live Monitoring, Recording, Search & Playback, Backup |
|
Physical |
Dimension |
134(W) X 125(D) X 35(H)mm |
|
Weight |
464g |
|
Power Source |
DC 12V/0.5A, PoE(Power over Ethernet): 802.3af |
|
Power Consumption |
Max 6W |
|
Operating Temp. |
-10°C ~ 50°C / 14°F ~ 122°F |
|
|
